Attaching a standard camera to the mount

Products > USA Gear Products > GEAR-ACTION-MOUNTS
Troubleshooting:
 
  1. Remove the mount screw from the housing by turning counter-clockwise until the screw is removed from the housing
  2. Insert the included tripod screw adapter into the housing
  3. Reinsert the mount screw through the housing and tripod screw adapter
  4. Turn the screw clock-wise to tighten the tripod screw adapter into the mount
  5. Attach your camera by screwing the tripod screw into the bottom of your camera
 
Please contact customer service if the troubleshooting above does not solve the problem.
Article ID: 1129, , Modified: 11/29/2014 at 10:55 AM

Was this article helpful?

Share this article