Not pairing to a device / How to pair BlueSENSE CLP

Products > GOgroove Products > BlueSENSE CLP
 
 
How to pair the BlueSENSE CLP to a Bluetooth enabled device: Make sure BlueSENSE CLP is in PAIRING MODE and that Power LED indicator lights are flashing. If not, please turn off the BlueSENSE CLP and start from the beginning of Pairing your mobile Bluetooth device to the BlueSENSE CLP instructions.

Try pairing the BlueSENSE CLP to more then one Bluetooth enabled device.

Pairing instructions may differ depending on the device you are using. Please refer to your device’s user manual for further information.

  1. Make sure the BlueSENSE CLP is off.

  2. Enter pairing mode by pressing and holding the Power button for 8 seconds. The LED indicator will be blue

  3. On your audio device, find BlueSENSE CLP in your Bluetooth menu. Select it for pairing. If required, use PIN: 0000.

  4. Auto-Connect can be performed with the last paired device. Turn on BlueSENSE CLP by pressing and holding the Power button for 5 seconds. When powered on it will automatically reconnect with your audio device if Bluetooth is enabled.

  5. Disconnect by using your Bluetooth device menu. You can turn off BlueSENSE CLP by pressing and holding the Power/Call button for 5 seconds. It will beep 4 times and the LED indicator will blink red before turning off.

Please contact customer service if the troubleshooting above does not solve the problem.

 

 

 

 

 
 
 
Article ID: 668, , Modified: 6/20/2014 at 9:33 AM

Was this article helpful?

Share this article