Connecting the Phono Preamp EQ

Power:

Operating Instructions

Connect the AC adapter to the DC 12V input

Connect the ground wire from the turn table to the GND screw

Press the power button to turn on. The power indicator will be lit.

Input:

RCA: Connect your turntable to the RCA IN ports L and R

NOTE: The signal indicator will be lit when receiving audio

DIN: Connect DIN cable to the DIN IN port

NOTE: The signal indicator will be lit when receiving audio

Output:

The preamp can be connected to amplifiers, mixers, and recording units. Do not use the RCA and DIN outputs simultaneously

RCA: Connect RCA cable to RCA OUT ports L & R DIN: Connect DIN cable to the DIN OUT port

Article ID: 2750, Created: 8/27/2021 at 4:59 PM, Modified: 11/20/2023 at 12:16 PM