How to set up your BlueVIBE DLX TV Edition

Please follow the instructions below to proceed to set up your BlueVIBE DLX TV Edition:

Ensure that both the headset and TRM are fully charged
We recommend charging over night for the best use
Plug in the transmitter in to the TV's digital audio output port (image of an example below)
If your TV does not have a digital audio output port and you have a cable box or sound system connected to the TV, please check those for an audio port.
Once the TRM is plugged in, hold the power button for both the TRM and DLX until they start flashing red and blue
Once they start flashing red and blue, let go of the power button.
A steady blue light will indicate that both are paired.

Please note: Upon shutting off and turning back on, the TRM and DLX do have to be paired after every use.

Imaged above are the different types of audio ports with a brief explanation of each

Red: Standard audio out port
- This is the preferred and easiest port, depending on your TV, to plug in the TRM into
Blue: RCA Red and White audio out ports
- Requires an RCA splitter
Green: Digital Audio Out Optical Port
- More and more newer TV's are coming out with this port in which you will require a Digital to Audio Converter
- Follow the link here to purchase if one is required

Also too, below you will see an image of an example of the plug in's on the back of a cable box:

Green: Audio port
Blue: RCA Red and White audio out ports

If you require further assistance, please contact our Customer Solutions team at support@accessorypower.com or at 1.866.796.7324 Mon thru Fri from 8am-5pm PST.

Article ID: 2584, Created: 7/8/2020 at 1:30 PM, Modified: 7/8/2020 at 1:31 PM

How to set up your BlueVIBE DLX TV Edition

Was this article helpful?

Share this article