Connecting the Phono Pramp Pro

Products > GOgroove Products > GOgroove Phono Preamp Pro
Power:
  1. Connect the AC Adapter to the DC 12V input.
  2. Connect the ground wire from the turntable to the GND screw. 
  3. Press the Power button to turn on; the power in indicator will be LIT.
Input:
  1. RCA: Connect your turntable to the RCA IN ports L & R.
  2. NOTE: The signal indicator will be LIT when receiving audio
  3. DIN: Conect the DIN cable to the DIN IN port.
  4. NOTE: The signal indicator will be LIT when receiving audio
Output:
  1. The preamp can be connected to amplifiers, mixers and recording units. Do NOT use the RCA and DIN outputs simultaneously.
  2. RCA: Connect the RCA cables to the RCA OUT ports L & R.
  3. DIN: Connect DIN cable to the DIN OUT port.
Article ID: 2525, , Modified: 11/20/2023 at 12:20 PM

Was this article helpful?

Share this article