Connecting the RF Presenter to a computer

Connection Procedure:
  1. Turn your computer on and allow it fully boot.
  2. Once the computer is fully booted, remove the battery cover from the remote.
  3. Remove the USB dongle from inside the remote and plug it into your computer.
  4. Switch the remote to the ON position.
  5. Wait while your computer installs necessary drivers. Once completed, your computer will prompt that install is done.
  6. Once drivers are installed, you should now be able to use the remote with your computer.

Please contact customer service if the troubleshooting above does not solve the problem.

 
 

Add Feedback