Setting the time or alarm on the BlueSYNC RST

How to set the time:

  1. Press the TIME button on the rear of the clock to enable clock adjustment.
  2. Use the plus or minus buttons to just the 12/24 hour format, hours, and minutes.
  3. Press the TIME button to confirm each setting once changes have been made.

 

How to set the alarm:

  1. There are two types of alarms on the BlueSYNC RST. On the top of the clock the icons look like a bell with the number one or number two. The number one bell is for one time alarm, and the number two bell is for a daily repeating alarm.
  2. Press the button for the alarm type you want to set.
  3. Press the button again to select the alarm sound; RAD = Radio and BU = Buzzing alert.
  4. Press the "S" (source) button to set the alarm time and use the plus or minus buttons to adjust the hours and minutes.
  5. Press the "S" (source) button to confirm each of your hours and minutes selection.
  6. When the alarm is sounding, press the "Zzz" button to snooze the alarm button for 9 minutes.


Please contact customer service if the troubleshooting above does not solve the problem.

Add Feedback